Amp Wires

Home / the12volt's Install Bay / Car Audio / Amp Wires (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

4x4store

Member - Posts: 11

Joined: June 06, 2002

Location: United States

Posted: September 05, 2002 at 11:28 AM / IP Logged

what is the best way to hide the apm wires when installing 2 amp on the 2nd seat of a 2000 expedition.

The 4x4 store plus More

If you drive it we customize It....

Ryan1

Member - Posts: 21

Joined: August 08, 2002

Location: United States

Posted: September 06, 2002 at 1:10 AM / IP Logged

I would say either build a small amp rack rack so that you can run wires under it, or see if you can run the wires under the material of the seat back. They are most likely foam backed seats with supports running through them.you could run wire loom from the bottom of the seat to a discrete place until you get under the flooring also. Just my 2 cents.

Ryan

-=SoundStream Junkie=-

Parkin' Lot Pimpin' 4 Life

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Amp Wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.