the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2 Head Units


Post ReplyPost New Topic
< Prev Topic Next Topic >
PhatGuy 
Member - Posts: 25
Member spacespace
Joined: July 19, 2004
Posted: August 04, 2004 at 1:43 AM / IP Logged  
Hi guys,
     You still haven't answered my questions. Will the relays cause any quality loss, and will switching the power using the remote turn on wire work as well?
     My casstte player is UniLink enabled, so it will work on most changers available today.
jimmeezgolfvr6 
Silver - Posts: 258
Silver spacespace
Joined: March 10, 2002
Location: Canada
Posted: August 04, 2004 at 6:09 AM / IP Logged  
in your case, the quality loss is negligible on the front speakers. you probably won't notice it. but if done to the rca's, the chances of picking up engine noise is much higher. switching the power usind the remote turn-on wire will work, but all you're doing is using one deck to turn off the other. you still cannot wire speaker wires in parallel.
PhatGuy 
Member - Posts: 25
Member spacespace
Joined: July 19, 2004
Posted: August 05, 2004 at 12:44 AM / IP Logged  
Thanx man,
     So I should be using the high level outputs of both units for all the channels. I heard that this can cause a lot of noise, is that true?? There is a connecter that has 2 male RCAs as input and one RCA output. Can I use that?? It transforms from sterio to mono. But since I have a wire for each channel it might work. Can anybody confirm?
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer