small fused power distributer

Home / the12volt's Install Bay / General Discussion / small fused power distributer (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

viper04649

Member - Posts: 17

Joined: July 12, 2004

Location: United States

Posted: August 06, 2004 at 10:33 AM / IP Logged

i am wiring some things to a relay in my car. i am going to run son leds, an amp remote, maybe a fan, etc. so i want to run like a 10ga wire from a relay to a fused power distributer with like 4 outputs (like 12ga or 16ga), all with their own fuse. but i can only find ones that take a 1/0ga and output some 4 or 8. that would be too big for my purposes. are smaller ones made?

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: August 06, 2004 at 11:45 AM / IP Logged

Will this work for you?

http://http://www.partsexpress.com/pe/pshowdetl.cfm?&PartNumber=263-510&DID=7

viper04649

Member - Posts: 17

Joined: July 12, 2004

Location: United States

Posted: August 06, 2004 at 8:16 PM / IP Logged

i think that will work.

roadrunner4d

Member - Posts: 5

Joined: August 08, 2004

Posted: August 08, 2004 at 1:08 AM / IP Logged

Autozone also sells a small relay block in their "wiring" section. It works had four outputs with blade style fuse for each. You can add 4 inputs in to it up to 10 gague I believe. It looks a bit cheap but I have 2 in my vehicle fully loded with no problems.

viper04649

Member - Posts: 17

Joined: July 12, 2004

Location: United States

Posted: August 08, 2004 at 11:06 AM / IP Logged

roadrunner4d wrote:

can you find a link to that (or even a product number), the closest Autozone to me is like 2 hours.

roadrunner4d

Member - Posts: 5

Joined: August 08, 2004

Posted: August 08, 2004 at 11:04 PM / IP Logged

http://http://www1.autozone.com/servlet/UiBroker?UseCase=C001&UserAction=performMoreDetail&Parameters=TRUE%7C%7EFuse+Blocks%7C%7ENONE%7C%7EPainless+Performance++++++++++++++++4+Circuit+ATO+Fuse+Center%7C%7ENONE%7C%7EFALSE%7C%7EFALSE%7C%7E196357%7C%7E176%7C%7E30002%7C%7ENONE%7C%7E%246.99%7C%7ENONE%7C%7ENONE%7C%7ENONE%7C%7ENONE%7C%7E0.175%7C%7ENONE%7C%7EV%7C%7EPPP%7C%7Etrue

That's a huge line so if it doen't work go to www.autozone.com and search for fuse holder. It is the 4 circuit type. I didn't pay the 6.99 they have listed my local zone had them for about $3. it's an ok block but IMHO not worth driving 2 hours to get. Painless wiring had some real nice blocks with relays. Autozone sells them but you might be able to find them cheaper online and save yourself a drive, but be prepared painless stuff is expensive.

roadrunner4d

Member - Posts: 5

Joined: August 08, 2004

Posted: August 08, 2004 at 11:14 PM / IP Logged

Also check out marine supply stores. They have awesome fuse blocks. I love the ST series of blocks for blade style fuses.

See here http://www.bluesea.com/dept.asp?d_id=7463&l1=7463

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

small fused power distributer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.