Splitting A/V for two monitors

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Splitting A/V for two monitors (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Farwell

Member - Posts: 35

Joined: April 08, 2003

Location: United States

Posted: September 13, 2004 at 3:42 AM / IP Logged

I need to Y and/or boost one A/V signal to two for two monitors. Can I just use a splitter or will the video signal be too weak and need to be boosted? What about the audio portion, just Y them? Is the audio signal more difficult to weaken vs. video or also need to be boosted? thanks What's a good product?

dxav

Silver - Posts: 314

Joined: September 11, 2002

Location: United States

Posted: September 13, 2004 at 9:12 AM / IP Logged

A Video amp should work fine. Don't know the model I used, but the case and text was the same as some other brands I have seen. They probably all work the same, just don't pay less than $15 (dealer) for one.

Audio doesn't need to be amplified. Do you have speakers in the monitors?

DXAV

Farwell

Member - Posts: 35

Joined: April 08, 2003

Location: United States

Posted: September 13, 2004 at 12:42 PM / IP Logged

The audio actually needs to go to three inputs. An aux. input device to the HU and then two screens, one of which has a speaker and the other IR. How to I split to 3? thanks

Quiqsv6

Member - Posts: 5

Joined: September 17, 2004

Location: United States

Posted: September 22, 2004 at 10:59 AM / IP Logged

Do you have an A/V switcher? Where is your sound signal coming from, what source? Are you getting it directly from a DVD player?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Splitting A/V for two monitors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.