93 chev truck door locks

Home / the12volt's Install Bay / General Discussion / 93 chev truck door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

roy67ss

Member - Posts: 18

Joined: October 26, 2002

Location: Canada

Posted: October 26, 2002 at 6:21 PM / IP Logged

hi guys,

from what i've read after much searching of this site, I presume that I have 5 wire alternating 12v positive door locks. Is that so ??

I'm installing a prostart remote starter and would like to use the remote lock option of the unit. It has negative lock output.

I also assume that the diagram for this system requires that I cut into the motor leg wires and not the switch wires for lock/unlock, right??

Just like to verify before cutting, thanks.

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: October 26, 2002 at 6:29 PM / IP Logged

this is easy yes cut the switch wires and connect switch side of each wires to the pin 87a on the relays, and pin 30 will go to each motor side of the wires., pin 87 and 85 constant 12 volts 10 amps for each realy so if you use oe constant wire put a 20 amp relay on it, than pin 86 is your input must be a negative input to work , do this and your straight any more help email me asap.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

roy67ss

Member - Posts: 18

Joined: October 26, 2002

Location: Canada

Posted: October 26, 2002 at 7:04 PM / IP Logged

Thanks Jon, I'll give it a try tomorrow.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 26, 2002 at 9:32 PM / IP Logged

5 wire (Type C) on the two door models
positive trigger (Type B) on the four door and keyless entry models

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: October 27, 2002 at 4:38 PM / IP Logged

The easiest place to get to these wires is to remove the drivers side dash speaker. Pull back the insulation and you will see a bunch of wires taped up in there are all your drivers door wires.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

93 chev truck door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.