Neutral Safety bypass

Home / the12volt's Install Bay / General Discussion / Neutral Safety bypass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dmb13

Member - Posts: 4

Joined: February 22, 2005

Location: United States

Posted: February 22, 2005 at 1:47 PM / IP Logged

Hey guys. Ive been having a little trouble with my Jeep. I swapped in a 1995 Jeep Wrangler wiring harness in my 1979 CJ7. The 95 had an automatic but my CJ has a stick. My question was reguarding the Neutral Safety Switch. I need to make the computer think that it have one and that its in neutral. Does anyone there have a diagram that tells what each wire for the NSS does and which i need to ground? I appriciate it. dylan

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: February 22, 2005 at 9:09 PM / IP Logged

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1995-96&make=Jeep&model=Wrangler&ID=18158&type=Alarm

My ex once told me I have a perfect face for radio.

dmb13

Member - Posts: 4

Joined: February 22, 2005

Location: United States

Posted: February 22, 2005 at 9:37 PM / IP Logged

ok. This says that the Neutral Safety Switch wire is BROWN / light blue. To make the computer think that its in neutral do i just ground that? You wouldnt happen to know which wire i hook up to get the reverse lights to work normally, do you? The diagrams that i have fail to get to that involved. My Jeep and i both thank you.

geepherder

Platinum - Posts: 3,668

Joined: October 27, 2003

Posted: February 22, 2005 at 9:58 PM / IP Logged

I don't know if it needs to see hot or ground, but I'd imagine ground. Jumper it and see, try ground first. For the reverse lights, just go back to your backup lights themselves and see what wire feeds them. If you're referring to the 95 harness, go to the autoparts store, and look in a repair manual.

My ex once told me I have a perfect face for radio.

overworked

Copper - Posts: 133

Joined: November 09, 2004

Location: Australia

Posted: February 23, 2005 at 8:44 AM / IP Logged

before you jumper it .....FUSE!!!!!! pop a 1amp fuse in their like the irish say to be sure to be sure to be sure

Sorry to climb over the top of you there geepherder, but yeah if your not sure of anythingh and need to try various connectons make sure you put a fuse in line with it...I've killed a couple of radio mutes on radios by not fusing. Customers are never happy when that happens

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Neutral Safety bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.