1st DIY enclosure

Home / the12volt's Install Bay / Car Audio / 1st DIY enclosure (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jthom999

Member - Posts: 5

Joined: November 12, 2002

Location: United States

Posted: November 13, 2002 at 11:37 PM / IP Logged

I've got 3 JL 12W6's that I may or may not keep in lieu of 2 MB Quart 12's or 10's (I care about SQ not SPL), however, I'm having a difficult time finding schematics and enclosure designs on the net. I'm fairly handy with a saw and a screw gun, so I don't think that the construction will be the problem, I just need a template from which to start. Also, what do you guys think is the best form of enclosure for SQ? Thanks in advance.

Sound Pressure

Silver - Posts: 711

Joined: March 09, 2002

Location: United States

Posted: November 13, 2002 at 11:59 PM / IP Logged

Here are the spec's for the JL subs. As far as sq I would do a sealed enclosure.

Sealed Enclosure Range: 0.75-1.75 cu.ft. (21.0-49.5 liters)

Ported Enclosure Range: 1.50-2.50 cu.ft. (42.5-71.0 liters)

Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

DeathsJester12V

Silver - Posts: 352

Joined: July 22, 2002

Location: United States

Posted: November 15, 2002 at 7:29 PM / IP Logged

As far as Enclosure Design, and bast box, etc..which way to have them fire...it all depends on the vehicle...

And for SQ, it is best to go with a Sealed Enclosure, ported and Bandpass enclosures are more for Bass.

Đễẳ†ђş 12\/ Ĵęśŧē®™

Search for other posts by DeathsJester12V

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1st DIY enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.