Disconnecting immobiliser

Home / the12volt's Install Bay / Car Security and Convenience / Disconnecting immobiliser (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mosameer

Member - Posts: 17

Joined: April 26, 2003

Location: United Kingdom

Posted: April 22, 2005 at 7:34 PM / IP Logged

Does anyone know how to disconnect or overide the factory alarm on the audi a4 1997??

im installing a remote start alarm and everytime it attempts to start, the fuel cuts out..and the key sign for the immobiliser shows up on the instrument panel!

someone please help as this is my last step

thanks in advance

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: April 22, 2005 at 7:38 PM / IP Logged

U.S.A................

OEM Alarm Disarm

GRAY/WHITE (-)

* See Note

* This Car Requires 2 Negative Pulses On GRAY/WHITE To Unlock Doors. GRAY/WHITE Wire Located At OEM Alarm Module Under Rear Seat.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

mosameer

Member - Posts: 17

Joined: April 26, 2003

Location: United Kingdom

Posted: April 22, 2005 at 7:44 PM / IP Logged

thanks for that..

but how exactly do i go about giving two negative pulses?

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: April 22, 2005 at 7:46 PM / IP Logged

U might try Remote Unlock Button twice.......Or see if your Alarm can be programed for double Pulse

There is a Pulse Generator available

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Disconnecting immobiliser

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.