Transmitter shutdown problem

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Transmitter shutdown problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jcassonjr

Member - Posts: 41

Joined: April 21, 2005

Location: United States

Posted: April 30, 2005 at 5:47 PM / IP Logged

I am doing a remote start in a ford contour with a Viper 571. The remote start activates but the starter does not crank. The shutdown diagnostic points to transmitter shutdown. The hoodpin and nuetral safty switch are fine and the brake wire has not even been hooked up yet. The customer will be here in 2 hours if any body has an idea.

Alpine cda-9855

Alpine Mrd-m1000

1 farad digital Rockford cap

2 Treo SSi 12's

Large centerport box

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 01, 2005 at 10:34 AM / IP Logged

If the Contour is a 1998 + Then what bypass module did you use for the PATS system ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

jcassonjr

Member - Posts: 41

Joined: April 21, 2005

Location: United States

Posted: May 01, 2005 at 11:01 PM / IP Logged

we used a 555f

Alpine cda-9855

Alpine Mrd-m1000

1 farad digital Rockford cap

2 Treo SSi 12's

Large centerport box

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 01, 2005 at 11:18 PM / IP Logged

Did you cehck to see if the car starts witht he key in the ignition ? Did you also check to see if the car stays running after you palce it in ready mode/stop & go mode ? If the car stays running, then it's not a wiring issue, rather a PATS bypass issue.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Transmitter shutdown problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.