the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

connecting neon lights to illuminated swi


Post ReplyPost New Topic
< Prev Topic Next Topic >
untamedstorm 
Member - Posts: 1
Member spacespace
Joined: December 18, 2002
Location: Australia
Posted: December 22, 2002 at 10:17 PM / IP Logged  
i have an illuminating switch to be connected to neon lights, on the switch it has 3 terminals marked: 1power, 2acc, 3ground... could someone tell me where i would connect the positive neon wire and the negative... and whether i have to earth the switch.... please help as i have already blown up 1 pair of these things... thankyou
*storm*
themagicone 
Silver - Posts: 325
Silver spacespace
Joined: October 01, 2002
Location: United States
Posted: December 22, 2002 at 10:44 PM / IP Logged  
there is 3 poles on the switch, one end is 12vlts constant - middle is ground and other is the where the power goes when switched
roy67ss 
Member - Posts: 18
Member spacespace
Joined: October 26, 2002
Location: Canada
Posted: December 23, 2002 at 12:23 PM / IP Logged  

The wires should be connected as it says on the switch. 1. 12v source  2. to your lights input. 3. to ground usually close to switch. You also have to ground the lights usually  near the lights with the ground wire of the lights.

Roy


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer