alpine kce 900e

wow didnt know that they made that item, i use to have the harness that allowed you to use the nav with any monitor, was only a single cable with a seperate ir, very similar to the kce 900e but the signals didnt feed through to the deck still. all the kce 900e is doing is breaking the connection to the deck, basicly a pigtail from what its discription is. http://www.alpine-europe.com/content/english/a311.det.KCE-900E_RGB-to-NTSC-Composite-and-Mono-Audio.htm was similar to the cable i used. If you really want to get invollved then you can cut your existing nav cable and basicly mod it to do the same as the kce 900e using this info: pigtail off the Voice guidance audio and ground and you should be set, it is at a normal RCA output. 1 - DATA GND 2 - VIDEO GND 3 - VOICE GUIDANCE AUDIO 4 - G. CONT (TTL HIGH ON VOICE GUIDANCE) 5 - COMPOSITE VIDEO OUT 6 - IR REMOTE (TTL DATA) 7 - D.CONT/EXTX DATA OUT 8 - RED VIDEO 9 - BLUE VIDEO 10 - VCC +5V 11 - EXRX DATA IN 12 - COMPOSITE TTL SYNC 13 - GREEN VIDEO There are 10 types of people in the world, ones that understand binary and ones that dont.

thanks infinkc, not sure if i want to start cutting wires yet. would like to find the adapter but if worse comes to it i'll give it a try. it looks like all i need is the audio lead. so when the music mutes the nav can talk. btw i have a ivad901 pxa h701 and the 852 nav.