recone or replace

Home / the12volt's Install Bay / Car Audio / recone or replace (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

azrapse

Member - Posts: 29

Joined: June 13, 2006

Location: United States

Posted: August 01, 2006 at 10:44 PM / IP Logged

I put a slit/hole in my boston acoustics SL60 comp. woofer today. When I took off the door panel I placed it on the seat and it slid down and one of the corners went right into the woofer. It made a perfect slit from a corner down to the VC, I am pretty sure it didnt damage anything but the cone. Should I order a replacement from Boston or have it reconed? Im not sure how much either one would cost.

austincustoms

Copper - Posts: 232

Joined: November 15, 2005

Location: United States

Posted: August 02, 2006 at 12:36 AM / IP Logged

that's a simple afro-tech repair - Just a little fiberglass should do the trick.

azrapse

Member - Posts: 29

Joined: June 13, 2006

Location: United States

Posted: August 02, 2006 at 12:39 AM / IP Logged

afro-tech? fiberglass?.....what do I need to do it myself?

austincustoms

Copper - Posts: 232

Joined: November 15, 2005

Location: United States

Posted: August 02, 2006 at 12:48 AM / IP Logged

just lay a little fiberglass over it, depending on how bad it is. It should hold up for a while.

cutlass013

Copper - Posts: 95

Joined: July 27, 2006

Location: United States

Posted: August 02, 2006 at 12:39 PM / IP Logged

glue or fiberglass or nething that will become hard and hold.. just becareful what you use some of it will eat away at the surround

azrapse

Member - Posts: 29

Joined: June 13, 2006

Location: United States

Posted: August 02, 2006 at 5:13 PM / IP Logged

what kind of glue? will crazy or super glue work? what would work best? fiberglass or glue? and where can I buy fiberglass resin?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

recone or replace

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.