making connections??

Home / the12volt's Install Bay / Car Security and Convenience / making connections?? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: February 03, 2003 at 9:51 AM / IP Logged

Some guy asked me one time if I burned off the insullation. I thought what kind of idea is that, I would likely set myself on fire before I set a car on fire. Does anyone actually do that?

J Rilla

Owner/Installer

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: February 03, 2003 at 12:11 PM / IP Logged

It would just make a big sticky mess if your burned them off. I cut my igntion wires with a knife. For smaller guage wires I have a pair of strippers that strip about 1/2 and inch off the wire automatically. It cuts the coating in the middle then pulls the insulation to each side of the cut automatically. Sure is handy :)

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

making connections??

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.