rocker switch to amp

Home / the12volt's Install Bay / Car Audio / rocker switch to amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: April 02, 2007 at 11:08 PM / IP Logged

Just use a DMM and wire it inline before your switch...setting should be on milliamps...then you'll know

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: April 03, 2007 at 5:46 AM / IP Logged

Since you are using a switch anyway, you can transfer the remote wire to a switched 12 volt source rather than the radio's output. Use a 1 or 2 amp fuse on the source end of the wire. (Although I personally wouldn't worry that the LED in the switch would cause excessive amperage pull from the deck's remote output.)

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

jmelton86

Gold - Posts: 1,228

Joined: February 07, 2007

Location: South Carolina, United States

Posted: April 03, 2007 at 6:55 PM / IP Logged

Yeah, thanx stevdart. I just was making use of my remote wire. I know what I need to do now.

2013 Kia Rio -90a alternator

DDX470HD GTO14001 GTO1014D (x3)

Big3 in 1/0G

1/0G to GTO14001

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

rocker switch to amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.