the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

led underbody


Post ReplyPost New Topic
< Prev Topic Next Topic >
bluburd 
Member - Posts: 19
Member spacespace
Joined: February 20, 2006
Location: United States
Posted: August 16, 2007 at 12:14 PM / IP Logged  

Hi,

I bought an LED underbody kit a few months back but ran into some issues. The wire that connects the LED strip to the control box is about 2 feet too short. I have a very long car (87 Firebird) and was wondering if I could extend the wires out.

Here is my plan:

Cut the wire, insert a few extra feet of braided wire the same gauge as the existing wire, solder and heatshrink connections between the old and new wire and wrap the new wire with durable and waterproof tape that will protect the new wire.

Has anyone done this before? Is there anything else that I would need to do or anything I am missing here?

Any help would be appreciated.

awdeclipse 
Copper - Posts: 285
Copper spacespace
Joined: August 05, 2007
Location: Michigan, United States
Posted: August 16, 2007 at 3:10 PM / IP Logged  
Seems like you got the right idea. Solder and heatshrink is a must. A good quality electrical tape will be extra insurance.
If you want to go slightly overkill. You could also use some type of sealant on the connections like silicone and build up a nice barrier on either side of your splice. Probably not necessary though.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer