the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 jeep grand cherokee heater problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
ikethegoalie 
Copper - Posts: 79
Copper spacespace
Joined: November 28, 2005
Location: United States
Posted: December 23, 2007 at 6:12 PM / IP Logged  

Ok guys I got a good one for you, Im at work doing an R/s (Viper 160XV) on a 06 Grand Cherokee.

My bypasses are as follows: Xpresskit 532 for door locks, 2nd starter etc., 556UW for immobilizer bypass (car refused to proram the 532 immobilizer properly)

The car remote starts fine, door locks work fine, buyt when the car is remote started neither the radio or the heater controls work, blower motor doesnt come on either.  Yes the switches are on.  

Any thoughts?

ikethegoalie 
Copper - Posts: 79
Copper spacespace
Joined: November 28, 2005
Location: United States
Posted: December 23, 2007 at 6:12 PM / IP Logged  
by the way, heater controls and radio both work with key in the ignition turned to ON position.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: December 23, 2007 at 8:39 PM / IP Logged  
Make sure that your PINK/LIGHT GREEN wire is powered. Also, the second starter/ACC wire has to see the proper resistance otherwise your HVAC will not turn on.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
ikethegoalie 
Copper - Posts: 79
Copper spacespace
Joined: November 28, 2005
Location: United States
Posted: December 23, 2007 at 9:59 PM / IP Logged  
got it figured out, the 532 wasnt controlling the accessory/2nd starter wire, dunno why, but did the thing with the relays posted on directechs and it worked fine

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer