1999 honda accord factory alarm disarm

so i put an Autopage RS 602 into a 99 Accord and for what ever reason the factory alarm keeps getting set off when you unlock the door. it only does this when you lock the door with the key or if you lock the door before shutting it. i have looked at the install sheets and the only thing i see is that the factory alarm disarm works off the locks, if I'm reading it right. it is becoming a serious issue for the customer so any help will be greatly appreciated. once again thx in advance

According to my notes from DEI there is a disarm wire in that car, it is a blue, negative trigger. On the EX the wire is located at the drivers power window switch, on the LX the wire is at the keyless/security unit which is attached to the drivers underdash panel.Installer, IT support, and FFL. I need less hobbies.

Twelvoltz wrote: According to my notes from DEI there is a disarm wire in that car, it is a blue, negative trigger. On the EX the wire is located at the drivers power window switch, on the LX the wire is at the keyless/security unit which is attached to the drivers underdash panel.

so can i get it in the car or do i need to take the door apart??

if customer doesn't want the fac alarm, grnd fact hood pin permanently and alarm wont arm, everything else works normaly.