the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

i getting a box for my system


Post ReplyPost New Topic
< Prev Topic Next Topic >
bumflik 
Copper - Posts: 58
Copper spacespace
Joined: January 03, 2008
Location: Florida, United States
Posted: January 03, 2008 at 8:37 PM / IP Logged  
I am getting 2x Alpine type-r 12" and I need a ported enclosure for them. I dont want to build a box,so I was wondering where could I buy a dual 12" ported enclosure for them? I have alrddy looked at "Woofersect.com" but their dual 12" enclosure is pretty expensive. I was looking for something under 100$
Here is the TYpe-R specs______________________
    * Subwoofer Size 12"
    * Impedance 2 ohms
    * Peak Power Handling 1500 watts
    * RMS Power Handling 500 watts
    * Woofer Surround Santoprene Rubber
    * Sealed Box Volume 0.85 cu. ft.
    * Ported Box Volume 1.70 cu. ft.
    * Sensitivity 85 dB
    * Frequency Response 23 - 500 Hz
    * Top Mount Depth 7.7"
    * Cutout Diameter 10.9"
i getting a box for my system -- posted image. i getting a box for my system -- posted image.
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: January 03, 2008 at 9:28 PM / IP Logged  
Getting the PROPER enclosure for $100 or less is going to require you building it yourself or finding a heck of a deal.
When I would build boxes for people I didnt know I would start pricing at $125 for a dual chambered ported box.   
Going with a prefabricated ported box with such nice subs sounds like a waste to me.
You will not find a pre fab box that will be spot on for any sub, thats why they are pre fab boxes. Leaving a lack of output, lack of clarity, or worse can cause failure of subs if the box is to large and power handling of the subs can be reduced by having them in too large an enclosure.
Try using the installer database on this site and find someone to build you a box, you might find a deal near you.
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
bumflik 
Copper - Posts: 58
Copper spacespace
Joined: January 03, 2008
Location: Florida, United States
Posted: January 04, 2008 at 7:33 PM / IP Logged  
kk thanx, you know ...I figured I would have no choice but to build a box myself. *sigh*
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: January 05, 2008 at 1:14 AM / IP Logged  
Well name the vehicle and space you have...also what amp you have and I'll design you a box for free...I'm bored.
It can look something like this
i getting a box for my system -- posted image.
big sexy lac 
Copper - Posts: 153
Copper spacespace
Joined: November 01, 2007
Location: Illinois, United States
Posted: January 05, 2008 at 9:58 AM / IP Logged  
Hey aznboi3644 can u design a vented box for me if your still bored I have an escalade third row is gone 20hx49wx44d I have 6-15L74dvc and 3 hifonics bxi2006 2000w rms@1ohm, if you can thanx a bunch!
well?
aznboi3644 
Gold - Posts: 2,600
Gold spaceThis member consistently provides reliable informationspace
Joined: May 01, 2006
Location: United States
Posted: January 05, 2008 at 1:03 PM / IP Logged  
I'll have it up later this afternoon...I have to install some subs and an amp for my friend
yearmax416 
Member - Posts: 43
Member spacespace
Joined: January 02, 2008
Location: New York, United States
Posted: January 06, 2008 at 6:09 PM / IP Logged  
Hey aznboi3644 I would like it if you could make up something for me .. I a sony xplod 10" XSL101P5 and looking for a sealed box for my Pathfinder with the third row still in .. The third row seat angles from in ward from the top down going from 14" - 17" depth wise to the rear hatch. I have about 40" W and 16" H.
If you can think up something in your spare time that would be much appreaciated. Thanks again.
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: January 06, 2008 at 7:02 PM / IP Logged  
Sony explod detailed box pics below.
i getting a box for my system -- posted image.
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
big sexy lac 
Copper - Posts: 153
Copper spacespace
Joined: November 01, 2007
Location: Illinois, United States
Posted: January 06, 2008 at 8:23 PM / IP Logged  
Hahaha damn that's a perfect enclosure for those crappy xplod's
well?
bumflik 
Copper - Posts: 58
Copper spacespace
Joined: January 03, 2008
Location: Florida, United States
Posted: January 08, 2008 at 3:36 PM / IP Logged  
jeffchilcott wrote:
Sony explod detailed box pics below.
i getting a box for my system -- posted image.
rofl so true, I dont think anybody should buy a sub for under 100$ And if u do, plze dont even think about building a box for it...its a waste.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer