01 continental remote start problems

Home / the12volt's Install Bay / Car Security and Convenience / 01 continental remote start problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

2001eclipse

Member - Posts: 29

Joined: July 09, 2007

Location: California, United States

Posted: January 11, 2008 at 4:29 AM / IP Logged

Installed a 791XV... programmed the tach, and the car starts right up. However several gauge lights stay on (ABS, Check Engine) and also on the message display "Check traction control" I double checked my wires and the only question I have is do ALL of the accessory wires have to be used in order to remote start? I have both ignition wires hooked up currently. I disconnected the battery and reconnected it back then tried starting the car with the key and all was well. No lights in the gauges stayed on. But as soon as I used the transmitter, then the lights came back on again.

Any help will greatly be appreciated. TIA

Back to Top

brhaugen

Copper - Posts: 275

Joined: September 30, 2005

Location: North Dakota, United States

Posted: January 11, 2008 at 6:52 AM / IP Logged

I have checked Audiovox, Ultrastart and JBS wiring charts:

There is some confusion on what wire is what:

Audiovox an Ultrastart say:

Ignition 2 GRAY / YELLOW (+) IGN SWITCH HARNESS

Accessory 1 BLACK/ LIGHT GREEN (+) IGNITION SWITCH HARNESS

But JBS says:

IGNITION 2 BLACK/ LIGHT GREEN (+) IGNITION SWITCH HARNESS

ACCESSORY /HEATER BLOWER 1 GRAY / YELLOW (+) IGNITION SWITCH HARNESS

Have you tested the wires??

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 11, 2008 at 8:55 AM / IP Logged

i got

Ignition 1 - BROWN / Pink (+) @ ignition harness

Accessory 1 - Gray / YELLOW (+) @ ignition harness

Accessory 2 - Gray / YELLOW (+) @ ignition harness

yes, both wires are the same colour and both must be used to allow the heater/blower motor to work.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

01 continental remote start problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.