ford f250 2008 remote start , factory dis

Home / the12volt's Install Bay / Car Security and Convenience / ford f250 2008 remote start , factory dis (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fabmaster

Member - Posts: 2

Joined: January 15, 2008

Location: Arizona, United States

Posted: January 15, 2008 at 11:55 PM / IP Logged

I need to install an alarm with remote start & pager in a 2008 F250 with the factory keypad keyless entry on the drivers door. I need to make the keypad disarm the aftermarket alarm. Has this been done before? Any ideas on what brand of aftermarket alarm to use?

Thanks

Do it right the first time.

Back to Top

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: January 16, 2008 at 6:53 AM / IP Logged

You're probably out of luck on disarming via the keypad...most aftermarket alarms don't have any kind of external disarm wires that could be used with it.

Generally, disarming an alarm without the remote involves turning the ignition on and pressing the hidden valet switch, at which time the alarm is going off. There's no provision for external disarming on a regular basis.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Back to Top

Search for other posts by chriswallace187

AirWaveGT

Member - Posts: 17

Joined: November 13, 2004

Location: United States

Posted: January 17, 2008 at 11:26 PM / IP Logged

code alarm has the input wires that you hook up to the lock/unlock motor wires so the factory keypad will arm and disarm the alarm. the factory alarm modules (also made by code alarm/audiovox) can do it as well.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ford f250 2008 remote start , factory dis

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.