the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

06 pathfinder se 2wd non navigationoptio


Post ReplyPost New Topic
< Prev Topic Next Topic >
baycars 
Member - Posts: 4
Member spacespace
Joined: January 19, 2008
Location: California, United States
Posted: January 19, 2008 at 5:21 AM / IP Logged  

I am looking for a VSS wiring, color and location  for a 2006 nissan pathfinder SE Non Navigation(Option)  to install a Aftermarket Navigation System.

Somebody say,

Lt.blue

In harness on back of radio

But No Lt Blue Wire in harness on  Back of radio. 

Any help would be greatly apperciated.

baycars
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: January 19, 2008 at 4:00 PM / IP Logged  
instrument cluster, pin 6 if I remember correctly. if there is no lt.blue wire in pin 6 you can add your own.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
baycars 
Member - Posts: 4
Member spacespace
Joined: January 19, 2008
Location: California, United States
Posted: January 19, 2008 at 9:07 PM / IP Logged  
Thank you.
But, #6 of instrument cluster did not have WIRE.
Will it be some different place?
I am sorry, but please help it. Thanking you in advance. Thank you.
baycars
baycars 
Member - Posts: 4
Member spacespace
Joined: January 19, 2008
Location: California, United States
Posted: January 20, 2008 at 1:58 AM / IP Logged  

II may have misunderstood a meaning.

I can take out VSS Signal if I attach wiring to there when pin 6 did not have wire.
Did you do it in this sense?

baycars
baycars 
Member - Posts: 4
Member spacespace
Joined: January 19, 2008
Location: California, United States
Posted: January 26, 2008 at 11:51 PM / IP Logged  

Thank you Mr Extreme1.

From PIN 6 of the instrument cluster, I was able to take out VSS. Thank you so much.

baycars
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: January 28, 2008 at 4:40 PM / IP Logged  
baycars wrote:

Thank you Mr Extreme1.

From PIN 6 of the instrument cluster, I was able to take out VSS. Thank you so much.

you're welcome.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer