the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

rear defroster and xko1


Post ReplyPost New Topic
< Prev Topic Next Topic >
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: January 20, 2008 at 3:49 PM / IP Logged  

i have a 2004 silverado ls and a clifford 50.5x and I thought the xk01 was supposed to kick on the rear defroster and mirrors,did i not do something in programming or would it be better to connect the defroster wire from the alarm to the defroster relay wire at the bcm and does that need to be pulsed or lached on a 2004 silverado

mobile1 
Silver - Posts: 479
Silver spacespace
Joined: February 23, 2004
Location: United States
Posted: January 20, 2008 at 9:32 PM / IP Logged  
The rear defrost and side mirror defrost should turn on only when the temp inside the car is 32 degrees or colder. This should also work for heated seats if you have them. If you want to use the defrost output from the clifford, you will have to change the polarity to 12V and set it for latched. There will be a purple wire coming off of the relay that goes to the defrost.
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: January 21, 2008 at 7:49 AM / IP Logged  
it has been below 32F around here and the defroster does not come on through the xk01 is there something i can do, also if i used the 50.5x should i not use the blue/white (-)200ma 2nd status/defogger output and hook it the rear defroster relay at the bcm,but i would really like to kmow why the xk01 is not turning on the rear defroster
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: January 22, 2008 at 9:53 PM / IP Logged  
or would a differen module work better
GregK 
Copper - Posts: 74
Copper spacespace
Joined: December 30, 2003
Location: Manitoba, Canada
Posted: January 22, 2008 at 10:52 PM / IP Logged  
I used an XK01 in a 2007 Hummer H2. The rear defrost and heated mirrors never come on and the heated seats keep coming on and cycling on/off every 30 seconds even when you start it with the key. :(
Details are in another XK01 thread if you're curious.
GDK Electronics
Home theatre & mobile electronics installations
Winnipeg, MB
rt4x4 
Copper - Posts: 107
Copper spacespace
Joined: November 28, 2006
Posted: January 26, 2008 at 7:41 PM / IP Logged  
do i need to hook up the 2nd accessory wire, or would it just be better to hook up the clifford defoger wire to the bcm?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer