the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 c300 mbz


Post ReplyPost New Topic
< Prev Topic Next Topic >
stevet 
Member - Posts: 36
Member spacespace
Joined: December 26, 2002
Location: United States
Posted: January 20, 2008 at 10:04 PM / IP Logged  
Any wiring diagrams on these cars yet????? Would a 07 be the same??? I suppose it would be a keyless ignition huh?
Anything?
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: January 21, 2008 at 9:06 AM / IP Logged  
Howie....you got any info on this car? Howwwwwie, are you there?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 21, 2008 at 9:22 AM / IP Logged  
All new Mercedes vehicles are equipped with a Lazer Key or Cardpass system. Current no bypass module is currently available to install remote start. Is it a RS or is it an alarm system that you installing ?
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
stevet 
Member - Posts: 36
Member spacespace
Joined: December 26, 2002
Location: United States
Posted: January 22, 2008 at 1:47 PM / IP Logged  
Actually I'm installing a tracking system that interupts the starter circuit. Just need location of 12v+, ignition and starter wire that can be interupted.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 22, 2008 at 2:17 PM / IP Logged  
Starter wire, only pick it up in engine bay fuse box, be very very careful how you test and from where you pick up, you would be safer in rear, go to battery, there is an ign in one of the trunk looms, remove light fitting and shove your antennae under bumper, break fuel pump relay low current feed.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer