mark 3 conversion van

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / mark 3 conversion van (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

d_stever

Member - Posts: 24

Joined: March 09, 2006

Location: United States

Posted: January 21, 2008 at 9:27 PM / IP Logged

has any one worked with late 80's mark 3 conversion vans? im trying to remove the driver side panel from the back of the door to the rear of the van, its one peice made of 1/8in wood sheet, and i cant figure out how its secured on to the wall of the van. i tryed my panel tool, but nothing gives, and it sounds like the wood is breaking. i am kinda thinking that thay screwed the plywood to the ribs of the van then carpet over the screws. if anyone has any ideas or experience with these vans PLEASE HELP

Back to Top

Ctoh

Copper - Posts: 123

Joined: June 15, 2005

Posted: January 22, 2008 at 6:58 PM / IP Logged

Mark iii typically secured the wall under the window ledge(has the cup holder/ash tray in it) and if up the side of the windows it may have wood trim pieces, take the window blinds off and there may be screws straight up under there. mark iii was horrible about not making their vans consistent so exacts is hard to say. Good luck,,,

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mark 3 conversion van

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.