Topic Closed)
Members
Search
Register
Login
Lets re think this. you need a switch that will turn on the other devices when you use your remote right?
Each one you turn on will have an audio output. Just hook in an audio switch on the audio output and hook the relay to that device.
http://www.crutchfield.com/App/Product/Item/Main.aspx?search=audio+switch&i=136CLSES
PAC Audio TR-4
Senses voltages as low as 0.8 volts and gives you a 12 volt output with a one second delay. Trigger off of speaker leads or +5 volt remote wires.
• Add a remote turn on for aftermarket amplifiers in vehicles without a factory remote wire.• Eliminates turn on pops in amplifiers. http://www.pac-audio.com/products/productsCatagory.asp?mmSearch=Trigger%20Modules
No those wont work. I was just thinking of something. What if I cut the remote wire. Run the sensor side to pin 86. From pin 30 I would run the tuner side of the remote wire, run the power wire for the dvd player, power wire for the antenna boosters, and the power wire for my tv screen. I would ground pin 85 and run pin 87 to a constant 12 volt +. Would that work?
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Saturday, June 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
