loosing pre sets on radio

Home / the12volt's Install Bay / Car Audio / loosing pre sets on radio (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

just a gxe

Member - Posts: 1

Joined: February 01, 2008

Location: New Jersey, United States

Posted: February 01, 2008 at 2:11 PM / IP Logged

Cliffnotes:

* Car barely turns over or needs a couple or more tries before it turns on

* Definitely need a new Optima battery but will that solve the problem?

* Most is not all the time I lost presets on radio station i've selected

* Car would be running but radio would die then turn back on

I'll try to make this short. I have a show car that was off commission for close to 6 months without being used. I have an Optima Yellow Top battery there. Since I’ve started using it, I figure the battery needs replacement since the car has trouble turning over (engine turning on).

Regardless even if the car turns on without a problem my presets on my radio disappears. SOMETIMES when I'm driving the AVIC unit dies then turns back on.

What are my problems and solution to this? I'm thinking I might need to re-install the whole unit to make sure that the power and ground wires are securely on or have a good connection. Please help me out.

Thanks in advance!

Back to Top

rhd180

Member - Posts: 13

Joined: January 17, 2008

Location: Manitoba, Canada

Posted: February 01, 2008 at 4:19 PM / IP Logged

if you know you have a bad battery already, i would start there. if the problem still continues after the new battery, then i would check out the deck connections

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

loosing pre sets on radio

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.