compustar 2 way alarm/starter

Home / the12volt's Install Bay / Car Security and Convenience / compustar 2 way alarm/starter (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

twin_turbo

Member - Posts: 11

Joined: February 01, 2008

Posted: February 01, 2008 at 9:20 PM / IP Logged

oh ok now i get it.

So i would need to use SPDT for the VW Dual parking light isolation

twin_turbo

Member - Posts: 11

Joined: February 01, 2008

Posted: February 02, 2008 at 11:21 AM / IP Logged

hi guys im kinda new at vehicle wiring, i was wondering if the (-) trigger/output from a remote alarm/starter unit is the same thing as ground?

Thank you.

twin_turbo

Member - Posts: 11

Joined: February 01, 2008

Posted: February 02, 2008 at 10:23 PM / IP Logged

hey does anyone know if i should put a diode for the lock, unlock, arm and disarm wires? they are all (-) output and im using a relay because my door locks are (+).

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 2 way alarm/starter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.