Adding Acc. to Viper 790 XV

Home / the12volt's Install Bay / Car Security and Convenience / Adding Acc. to Viper 790 XV (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

LJBowling21

Member - Posts: 9

Joined: February 18, 2003

Location: United States

Posted: February 27, 2003 at 10:26 PM / IP Logged

I had a Viper 790 xv installed by CC....I had sh*t loads of gift cards other wise i would have gone elsewhere...so anyways I was wondering which wires are for the Accessory outputs, I want to be able to control my neons from the transponder (and yeah i know i will need to use a reley). Also will I need to reprogram the remote as well.

Thanks for any help,

Back to Top

dashrat77

Member - Posts: 25

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 23, 2003

Location: Colorado, United States

Posted: February 28, 2003 at 8:36 PM / IP Logged

unless you have trunk release or window mod already hooked up you can use the RED / white along with a latching relay. This way you dont have to reprogram your remote. Hold the "aux" button for 3 seconds to turn neons on & another 3 sec to turn them off.

Back to Top

LJBowling21

Member - Posts: 9

Joined: February 18, 2003

Location: United States

Posted: February 28, 2003 at 10:15 PM / IP Logged

The RED / white is a neg. out put right

Back to Top

LJBowling21

Member - Posts: 9

Joined: February 18, 2003

Location: United States

Posted: February 28, 2003 at 10:17 PM / IP Logged

Also...

What is the easiest way to connect the diode, do I have to solder it our can i use butt splices and electrical tape.

Back to Top

Phill McCrank

Member - Posts: 32

Joined: February 16, 2003

Location: United States

Posted: March 02, 2003 at 5:02 AM / IP Logged

there is a ch 4 output that is programable for latched you will have to use a relay to increase the output of it but you dont need a latching relay.

Phill Bowen

Lead Installer,

Master of all trades.

Back to Top

dashrat77

Member - Posts: 25

Joined: February 23, 2003

Location: Colorado, United States

Posted: March 03, 2003 at 11:32 PM / IP Logged

Thanx phill, totally forgot about it. Yeah, use that one, but make sure you also use a relay. Should be cheaper than the latching relay.

As far as the diode, I solder them but try not to heat it up more than you have to. Then I wrap with tape or shrink tube.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Adding Acc. to Viper 790 XV

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.