wiring flashing led

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / wiring flashing led (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

newbie212

Member - Posts: 4

Joined: September 30, 2007

Location: Ohio, United States

Posted: February 09, 2008 at 12:01 PM / IP Logged

Ok I just bought this product http:////VARAD-LL-RE-SUPER-BRIGHT-RED-FLASHING-LED-for-ALARM_W0QQcmdZViewItemQQcategoryZ33713QQihZ008QQitemZ180213373733QQrdZ1QQsspagenameZWDVW

Red wire goes to 12v constant.. Done!

Black goes to Ground... Done!

Yellow goes to 12v ignition (grounded when engine is off) Where's a good place to tap into this? Car is a 1999 Toyota Corolla.. Thanks in advance..

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 09, 2008 at 2:47 PM / IP Logged

go to fuse panel and tag the radio fuse. that works just as well, or open up the driver collumn, and tap into the ignition wire BLACK / YELLOW

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring flashing led

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.