switch on tweeter

Home / the12volt's Install Bay / Car Audio / switch on tweeter (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: February 13, 2008 at 4:30 AM / IP Logged

i have a set of alpine tweeter that i want to put on a audiobahn amp a2002t but only on 1 channel but i want to have them som i can remotely turn them off with a flip switch does it matter on the maperage on the switch or should i use the amperage according to the fuse on the amp.

RMS Power Output: 50W x 2 @ 4 Ohms

Peak Power Output: 100W x 2 @ 4 Ohms

Bridged Output: 200W x 1 @ 4 Ohms

Fuse Rating 25A x 1

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

haemphyst

Platinum - Posts: 5,054

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: February 13, 2008 at 8:27 AM / IP Logged

No... pretty much any switch would work. I'd still recommend around a 5A rating though.

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: March 11, 2008 at 7:45 PM / IP Logged

I have a led switch its has 3 prongs the basic 2 and a ground . Since I'm wring these to some tweeters and they are reciving signal verses power is it safe to power the led on the switch

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 30, 2008 at 6:37 AM / IP Logged

You should not try to use the LED. If you insist on using the LED you would have to make the switch control 2 seperate relays (or a single DPDT relay).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

switch on tweeter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.