proximity sensor

Home / the12volt's Install Bay / Car Security and Convenience / proximity sensor (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

pepboy

Member - Posts: 11

Joined: March 28, 2004

Location: California, United States

Posted: February 29, 2008 at 9:35 AM / IP Logged

Howie, i mounted the sensor with the clifford log pointing down towards the floor. and the wire pointing towards the front of the car, i thought thats what the instructions said, but i may be wrong. should i put it pointing up ?

pepboys

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 29, 2008 at 11:17 AM / IP Logged

Logo must face in to vehicle, DEI say put cable behind to get a rear extension.

Back to Top

pepboy

Member - Posts: 11

Joined: March 28, 2004

Location: California, United States

Posted: February 29, 2008 at 11:47 AM / IP Logged

Thanks Howie. i am working on it right now.

pepboys

Back to Top

pepboy

Member - Posts: 11

Joined: March 28, 2004

Location: California, United States

Posted: February 29, 2008 at 11:50 AM / IP Logged

one more question Howie, this excursion is going to get a 9" to a 11" lift. so that sensor on the roof is going to be higher then most peoples head. should i bring the sensor down ?

pepboys

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 29, 2008 at 12:13 PM / IP Logged

No, readjust if neccessary when the time comes. Remember, the less you tweak, the less to go wrong!

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

proximity sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.