spacer spacer spacer spacer

OS3B or GMAHLANB with Steering Wheel - Tip

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 10
Member spacespace
Joined: February 26, 2008
Location: Arkansas, United States
Posted: February 26, 2008 at 11:16 AM / IP Logged  

hey guys, i found something out the hard way.  

if you are using a os3b or a gmahlanb to power a screen,  the first thing you need to do is read the bulletins.  pac and peripheral have bulletins out concerning their plugs that mate with the factory wiring.  you must jump around the plug for constant +, ground, and the data signal.  also, don't run the power through the module for your screen's power.  hook on where you are jumping around.  these modules don't do well when you run a lot of current through them.

also, if you are powering anything else, you  must, must ,must get your power and ground from somewhere other than the radio harness.  i suggest going to the battery or the fuse box and using a relay. 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Monday, June 5, 2023 • Copyright © 1999-2023, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer