the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

do midrange, tweeters need second amp?


Post ReplyPost New Topic
< Prev Topic Next Topic >
rainbow_xb 
Member - Posts: 1
Member spacespace
Joined: March 10, 2008
Location: Georgia, United States
Posted: March 10, 2008 at 11:27 PM / IP Logged  
Hey guys, I need help with this. I have an 05 scion xb. I have a rockford t1001db and two L5, I just bought a 4 channel kenwood amp and two sets of the polk momo 6.5 component sets. How do I go about wiring this amp? I know I need to run the rcas from the aftermarket radio to the amp, and hook both the speaker and the tweeter to the crossover and then the crossover to the amp. How do I link this amp to the battery or to the current amp. I also have a 1 fared cap on that t1001db amp. And what wires, etc will I need? Is it best to put the crossover on hpf or lpf or off? And bass boost on or off? Thanks in advance.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer