what’s better, this or mdf?

Well, I got the box built and installed.     When I went to put the box in the trunk, I had to put it in sub facing up, then planned on rotating it so the sub/port would face the rear. Well, when I measured the max space the box could be I didn't account for having to rotate it. So... I rode around with the sub/port facing up for a while then did some thinking; I could just remove the rear seat (bottom and seat back) and slide the box in from the cabin -Voila!

Boston Acoustics G51044 (dual 4ohm) 1.3cu' tuned to 26.6Hz. Sounds freakin clean as heck, goes insanely low!

I'm not on a PC in which I can upload newer photos at the moment, but people love pics anyways . Here is a pic of my last setup; the Boston G51044 with GTR (PR) in .5cu' -per Boston. GTR tuned to 25Hz;

https://i209.photobucket.com/albums/bb103/jmelton86/PICT0048.jpg

And for videos of my new setup (while still upfiring...)

This is "Bass, I Love You" with no ssf;

http://s209.photobucket.com/albums/bb103/jmelton86/?action=view¤t=no_ssf2.flv

Here is the same song with a ssf @ 32Hz (i've got to order the Harrison FMods to get it cut @ 25Hz);

http://s209.photobucket.com/albums/bb103/jmelton86/?action=view¤t=ssf__32Hz.flv

Hope you enjoy!

I just decided i'm not going to upload any new photos until I get my system "finished" -notive the ""! I just need my dash kit to house my Alpine EQ, Jantzen Silver caps to complete my front stage x-overs (The highpass on my midwoofers are @ 6dB per right now, also they are x-overed a bit too low. Getting the caps will put it @ 12dB per, at the right cutoff), and the Harrison FMods for my subsonic filter.