kick panels volume venting etc?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / kick panels volume venting etc? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

markdjr

Member - Posts: 12

Joined: March 09, 2008

Location: Oregon, United States

Posted: March 13, 2008 at 3:40 AM / IP Logged

I just made some kick panels for some MB Quart 5 1/4" Q Series components. Now I am wondering, did I make the optimal enclosure for these? Is volume important? Should it be vented or sealed? I've heard of using fleece inside the pod to do something to the bass response. Any input? Thanks.

Back to Top

davngr

Copper - Posts: 109

Joined: October 20, 2007

Posted: March 13, 2008 at 7:30 AM / IP Logged

markdjr wrote:

I just made some kick panels for some MB Quart 5 1/4" Q Series components. Now I am wondering, did I make the optimal enclosure for these? Is volume important? Should it be vented or sealed? I've heard of using fleece inside the pod to do something to the bass response. Any input? Thanks.

you dont want to vent kicks seled will give you more/better sound if your pods turned out smaller than you had hoped then stuffing them with pillow stuffing/fleece will fool the speaker into thinking that the enclosure is larger than it actually is. ps. dont cram the material in there it must be a loose fit if you compress the material in anyway you defet the purpose.

life is a comedy to think, a tragedy to feel

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kick panels volume venting etc?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.