the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 chevy express van 4.8l, vss


Post ReplyPost New Topic
< Prev Topic Next Topic >
hvacrepairman 
Member - Posts: 4
Member spacespace
Joined: March 16, 2008
Location: California, United States
Posted: March 16, 2008 at 1:53 PM / IP Logged  

Could someone please help me with the location and color of the VSS wire on a 2007 Chevrolet Express Van? Thank You

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: March 16, 2008 at 4:01 PM / IP Logged  
 VSS WIRE Dk.GREEN / WHITE At PCM under hood, driver side   AC 
 DATABUS INTERFACE Pin-2(top row from left) Diagnostic plug below dash   DATA 
 PASSLOCK DATA Yellow In 3 wire harness from ignition switch   DATA 
 PASSLOCK GROUND ORANGE / black or black In 3 wire harness from ignition switch   - 
hvacrepairman 
Member - Posts: 4
Member spacespace
Joined: March 16, 2008
Location: California, United States
Posted: March 16, 2008 at 11:49 PM / IP Logged  

Thank you ever so much for that information.

hvacrepairman 
Member - Posts: 4
Member spacespace
Joined: March 16, 2008
Location: California, United States
Posted: March 17, 2008 at 9:58 PM / IP Logged  

Well I had time today to look for that dark green with a white stripe.  I found @ least 5 of them.  How do I tell which one is the correct one?  I am trying to hook up a Pioneer Navigation unit that requires this VSS wire, I tried the first GREEN / WHITE and no go.

sparkie 
Platinum - Posts: 2,061
Platinum spacespace
Joined: November 06, 2003
Location: Canada
Posted: March 18, 2008 at 6:46 PM / IP Logged  
I believe the VSS wire is in the green plug of the PCM in position 50. The green connector is the one closest to the fender and you usually need to remove the one closest to the motor to get it out. There are 7 mm bolts that secure the plugs in the PCM.
sparky
hvacrepairman 
Member - Posts: 4
Member spacespace
Joined: March 16, 2008
Location: California, United States
Posted: March 18, 2008 at 7:02 PM / IP Logged  

Yep that was the one, I had to pull the whole controller out to get access.  Pin 50 was the correct wire.

thanks a bunch


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, October 7, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer