the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

connecting a 2ohm dvc sub with a 4ohm dvc


Post ReplyPost New Topic
< Prev Topic Next Topic >
k_fifth 
Member - Posts: 20
Member spacespace
Joined: March 16, 2008
Location: New Jersey, United States
Posted: March 16, 2008 at 10:25 PM / IP Logged  
Is it possible to connect a 2 ohm sub and a 4 ohm sub in parrallel/series. i was thinking wirirng the 2 ohm sub at 4 ohms and the 4ohm sub at 8 ohms.ing the12volt.com calculator those numbers in ohms (4 ohm load & a 8 ohm load) should give me 2.66667 ohms. can i do that type of thing or not? Anyone can give me some feedback? 
a.d.r.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 12, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer