2008 Toyota Rav4 Alarm/Remote Start Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2008 Toyota Rav4 Alarm/Remote Start Wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lchow0825

Member - Posts: 3

Joined: March 20, 2008

Posted: March 20, 2008 at 1:09 AM / IP Logged

Does anyone have a wiring colour code for a 2008 Rav 4 V6 and the remote start install with factory security bypass

Thanks

Louis

Back to Top

jeffwhiteman

Copper - Posts: 124

Joined: October 20, 2006

Location: United States

Posted: March 20, 2008 at 8:42 AM / IP Logged

Wire/Function Colour Location/Description Polarity

12 VOLTS Blue Ignition switch harness +

IGNITION White Ignition switch harness +

IGNITION 2 Pink Ignition switch harness +

ACCESSORY Red Ignition switch harness +

STARTER White Ignition switch harness +

STARTER 2 Yellow Ignition switch harness +

KEY SENSE Blue Ignition switch harness -

TACH SIGNAL Gray Diagnostic plug below dash on driver's side AC

LOCK Pink On white plug in driver's kickpanel -

UNLOCK Blue (double pulse) On white plug in driver's kickpanel -

DOORPIN White 6-pin plug on fusebox -

TRUNK PIN Lt.green On 30-pin plug on top of fusebox -

FACTORY ARM Arms with lock

FACTORY DISARM Disarms with unlock

BRAKESWITCH Blue At switch or 30-pin plug on top of fusebox +

PARKLIGHTS Green On 30-pin plug on top of fusebox +

HAND BRAKE Black On 14-pin plug on top of fusebox -

HORN Lt.green At steering column -

HEADLIGHTS Blue At light switch harness -

REVERSE LIGHTS Red On 30-pin plug on top of fusebox +

VSS WIRE Violet On back of radio AC

Back to Top

lchow0825

Member - Posts: 3

Joined: March 20, 2008

Posted: March 20, 2008 at 11:36 AM / IP Logged

Dear Jeffwhiteman,

thx for your quick reply with very useful infomation (i love this place)

however, what can i do if my alarm only give me single pulse (can be -&+) for the unlock output when the system need : "UNLOCK Blue (double pulse) On white plug in driver's kickpanel "

Back to Top

jeffwhiteman

Copper - Posts: 124

Joined: October 20, 2006

Location: United States

Posted: March 20, 2008 at 2:20 PM / IP Logged

If your alarm is not programable for 2 pulses then this link should help

https://www.the12volt.com/installbay/forum_posts.asp?tid=92024&KW=single+pulse+to+double+pulse

Back to Top

lchow0825

Member - Posts: 3

Joined: March 20, 2008

Posted: March 20, 2008 at 2:57 PM / IP Logged

cool...i'll try!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2008 Toyota Rav4 Alarm/Remote Start Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.