Shock Sensor

Home / the12volt's Install Bay / Car Security and Convenience / Shock Sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bizzy818

Copper - Posts: 60

Joined: February 26, 2003

Location: United States

Posted: March 02, 2003 at 9:50 PM / IP Logged

you guys know shock sensors have a + and - adjustment place. what is that for? thnx

Vinguise

Member - Posts: 14

Joined: February 18, 2003

Location: United States

Posted: March 03, 2003 at 9:55 AM / IP Logged

The plus and the minus is to adjust the sensetivity of the shock sensor. For example, if a car drives by with loud exhaust and set your alarm off, you would adjust to the minus direction. If its raining and that sets off your alarm you adjust it to the minus. If you kick the tire with all you might and that doesn't set it off, you adjust it to the plus.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Shock Sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.