2008 mariner bypass problem

I am trying to install a RS in a 2008 Mercury Mariner. The RS went in ok but the transponder bypass is being a pain. Fortin shows that the KEYOVERRIDE-ALL should work. The problem that I'm having is that the plug in the vehicle doesn't match any of the plugs on the provided diagram. Any help would be appreciated.

It will work. On the four pin plug, find the one wire that tests as an ignition. Your yellow from the bypass goes there. The pin right next to that is ground the black from the bypass goes here, or you can ground to the chassis. The 3rd pin will get the yellow black from the bypass. Fourth pin gets the violet/white from bypass. I don't ever go by the pictures, and if i remember right, they list the pins wrong for that vehicle.....

I checked the plug that goes into the transponder ring around the ignition and this is what I found (going from left to right). pin 1 +12V ignition (PURPLE / orange) pin 2 +12V ignition (yellow/red) pin 3 Ground (BLACK/ gray) pin 4 +12V ignition (blue/green) I done the older Mariners/Escapes/Tributes with no problems

Memphisman, are you located in Memphis? Come fix my RS =P

No, I'm from PA. It's my nickname because I'm a Memphis Car Audio dealer and use their product in my demo vehicles.