help trunk release

Home / the12volt's Install Bay / Car Security and Convenience / help trunk release (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

sinple4u

Member - Posts: 16

Joined: January 27, 2003

Location: United States

Posted: March 02, 2003 at 8:32 PM / IP Logged

how can i install a trunk release i have the trunk release kit already i have a viper alarm

sinple4u

Member - Posts: 16

Joined: January 27, 2003

Location: United States

Posted: March 03, 2003 at 11:29 AM / IP Logged

how can i make my alarm work with the trunk release

help i have a viper 3 channel alarm

customsound

Member - Posts: 29

Joined: March 02, 2003

Location: United States

Posted: March 03, 2003 at 11:36 AM / IP Logged

Use a mercury switch.About 15 or less @ best buy stores, i know I work there. help trunk release -- posted image.

sinple4u

Member - Posts: 16

Joined: January 27, 2003

Location: United States

Posted: March 03, 2003 at 11:47 AM / IP Logged

ok iam new to this doe i need a relay and what channel or cable i connect the release cable to

customsound

Member - Posts: 29

Joined: March 02, 2003

Location: United States

Posted: March 03, 2003 at 11:59 AM / IP Logged

give me ur car info

sinple4u

Member - Posts: 16

Joined: January 27, 2003

Location: United States

Posted: March 03, 2003 at 12:00 PM / IP Logged

help can iget a diagram how the relay goes connected to the trunk release and the alarm

sinple4u

Member - Posts: 16

Joined: January 27, 2003

Location: United States

Posted: March 03, 2003 at 12:05 PM / IP Logged

1990 acura integra

the12volt

Administrator - Posts: 3,955

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: March 03, 2003 at 12:26 PM / IP Logged

You'll have to add a solenoid. Since you'll control it from your keyless entry, there's no need to install the switch that's included, but you will need to add a relay. Here are just a few sites that carry the part you need. http://www.commandoalarms.com/itm90005.htm , http://www.avsmarts.com/cgi-bin/avs/CS-611.html , http://www.asianwolf.bigstep.com/item.jhtml?UCIDs=1068694%7C1069136&PRID=1099345

the12volt • Support the12volt.com

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 03, 2003 at 4:14 PM / IP Logged

we need to know what kind of car you have. what type of trunk release do you have with the car. do you push a button from the inside to open it or do you have to pull a release beside the drivers seat.

david

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

cpgoose

Gold - Posts: 1,098

Joined: July 08, 2002

Location: United States

Posted: March 11, 2003 at 1:21 PM / IP Logged

sinple4u, here's the diagram you need to install your trunk release kit to your viper alarm. You'll need a relay as well to connect the solenoid to the alarm.

check out this diagram

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.