2007 Seat Leon Alarm Wiring

Hi,

I am looking for a wiring diagram for my seat leon 2007 make. I need it to install an alarm system with a remote starter.

Thank you very much! 

POWER SUPPLY + 30: connect to the 5 mm2 RED wire located in the fuse box.

- 31: connect with a ring terminal directly to the car body.

IGNITION WIRE +15/54: connect to the 4 mm2 BLACK wire located in a multiway

connector in the fuse box.

DIRECTION INDICATORS Connect to the BLACK/ WHITE and BLACK/ GREEN wires in the wiring

harness coming out of the brown connector placed behind the fuse box.

The closing of the electric windows is obtained timing to 24s the

YELLOW/LIGHT BLUE wire used for the closing of the doors.

Connect to the YELLOW/LIGHT BLUE wire (lock) and VIOLET

(YELLOW /GREEN) wire (unlock) located in the wiring harness directly

inside the driver’s side door.

Cut the BLACK/ VIOLET wire located in the wiring harness coming out

of the 10 AMP fuse nr. 29, in the fuse box, placed on the left of the

dashboard, driver’s side.

STARTER CUT OFF + 50: Cut the RED / BLACK wire located at the position nr. 3, in the

wiring harness coming out of the 6 way light brown connector placed on

the connector holder plate, under the dashboard, driver’s side.

BONNET SWITCH Install an additional switch on the front headlamp support plate, driver’s

side.

DOORS SWITCH Connect to the PINK/LIGHT BLUE (BLUE/GREY) wire located at the

position nr. 16 of the light blue connector coming out of the control

system placed on the left of the steering column.

BOOT SWITCH Connect to the BROWN / BLACK wire located at the position nr. 15 of

the light blue connector coming out of the control system placed on the

left of the steering column.