the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

battery isolator, 96 silverado


Post ReplyPost New Topic
< Prev Topic Next Topic >
s10riddinlow 
Member - Posts: 1
Member spacespace
Joined: January 29, 2006
Location: United States
Posted: May 07, 2008 at 7:26 AM / IP Logged  
im running a stinger isolator in a 96 chevy silverado for the 4 back batterys. im not sure how to wire this thing in. has ne one installed one before. thanks guys
jvillefinest 
Copper - Posts: 255
Copper spacespace
Joined: December 29, 2003
Location: Florida, United States
Posted: May 07, 2008 at 10:04 AM / IP Logged  
Run power from the front battery to a fuse to the isolator then out the isolator to another fuse to the secondary batteries. Then starter power to one of the smaller lugs and ground to the other smaller lug make sure it makes a thud when you turn the key forward and you should be good.
2007 Acura TSX
SQ setup in the works

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, January 27, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer