the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1993 mazda mx3 keyless entry with remote


Post ReplyPost New Topic
< Prev Topic Next Topic >
cyril 
Member - Posts: 24
Member spacespace
Joined: January 30, 2008
Location: Alberta, Canada
Posted: May 22, 2008 at 12:52 PM / IP Logged  

I want to install remote starter with keyless entry in 1993 Mazda MX3 Precidia, It has an alarm system but the wireing specs show n/a.

It has power door locks/keyless entry but the wireing specs say I need to add a actuator in the drivers door. I want to have starter, keyless & alarm system arm/disarm all on the same transmitter.

can anybody give me advise on this? I don't want to do the install until I have more info.           

Thanks, Cyril

cyri L. Churchill
kola7126 
Copper - Posts: 93
Copper spacespace
Joined: September 13, 2007
Location: Russian Federation
Posted: May 31, 2008 at 2:03 PM / IP Logged  
< language=>function printit(){ if (window.print) { window.print() ; } else { var WebBrowser = '< ID="WebBrowser1" width=0 HEIGHT=0 CLASSID="CLSID:8856F961-340A-11D0-A96B-00C04FD705A2">';document.body.insertAdjacentHTML('beforeEnd', WebBrowser); WebBrowser1.ExecWB(6, 2);//Use a 1 vs. a 2 for a prompting dialog box WebBrowser1.outerHTML = ""; }}< language=> var NS = (navigator.appName == "Netscape");var VERSION = parseInt(navigator.appVersion);if (VERSION > 3) { document.write('<>< = value="Print this Page" name="Print" ="printit()">'); } <>< =printit() = value="Print this Page" name=Print>
  MAZDA
  
 MODEL YEAR(S)
 MX-3  1992 -1996
 KEY T-HARNESS IMMOBILIZER
  N/A   N/A   N/A
 PART  COLOR LOCATION
 12 VOLT CONSTANT  BLACK (+)   IGNITION SWITCH HARNESS
 STARTER BLACK/ BLUE (+)  IGNITION SWITCH HARNESS
 STARTER 2 N/A 
 IGNITION 1 BLUE (+) IGNITION SWITCH HARNESS
 IGNITION 2 N/A 
 IGNITION 3 N/A  
 ACCESSORY /HEATER BLOWER 1 BLACK/ RED (+)  IGNITION SWITCH HARNESS
 ACCESSORY /HEATER BLOWER 2 N/A  
 KEYSENSE N/A  
 PARKING LIGHTS ( - ) GREEN (-)  @ STEERING COLUMN HARNESS
 PARKING LIGHTS ( + ) RED / BLACK (+)  @ DIMMER SWITCH
 POWER LOCK ADD ACTUATOR, See NOTE *1  TO DRIVERS DOOR ONLY, See DIAGRAM
 POWER UNLOCK ADD ACTUATOR, See NOTE *1  TO DRIVERS DOOR ONLY, See DIAGRAM
 DOOR TRIGGER RED / WHITE (-)  @ 3-PIN PLUG, ABOVE FUSES
 DOMELIGHT SUPERVISION USE DOOR TRIGGER, Requires Part #775 Relay  
 TRUNK RELEASE N/A  
 SLIDING POWER DOOR N/A  
 HORN GREEN/ RED (-) or GREEN/ BLACK (-)  @ STEERING COLUMN HARNESS
 TACH YELLOW/BLUE  @ DISTRIBUTOR
 WAIT TO START LIGHT N/A  
 BRAKE GREEN (+)  @ SWITCH ABOVE BRAKE PEDAL
 FACTORY ALARM DISARM  N/A  
 ANTI-THEFT N/A  
 EXTRA INFORMATION
 NOTE *1 the FACTORY DOOR LOCK SYSTEM is a CENTRAL DOOR LOCK TYPE, to add KEYLESS ENTRY to this system will require the adding of a DOOR LOCK ACTUATOR Part #742, soem units will also require additional relays part #775, to connect, See DIAGRAMS.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer