micro relay instructions?

Ok so I have a micro relay,

Has a three pin connector;

blue

red

green

and a a connector with larger gauge

purple

green

blue

white

brown

I have a two wire actuator (reversed polarity)

I would like to know how to properly connect this relay to the door locks?

Could anyone help me out?

Thank You

Well a part number and manufacture of the relay may help.

A picture of it may also help. You can stick it in a scanner if a camera is not available.

here it is,

the brand I cannot figure out. it is not written anywhere I ordered an actuator online and this came with it.I like it because it is much smaller than taping two bosch relays together, and these are also solid state.

1 more

Where did you order it from so we may see it online.

It looks like a wireless Remote to me.

OKAY after about 3 hours of looking I found it.

http://commandoalarms.com/itm40007.htm

Door Lock Relay Module for 5 Wire Reverse Polarity Door Locks

Use with KL-455, RS-Combo & EZ-2100 on Vehicles with Positive or Reversed Polarity Door Locks

ok so I finally found after many tried with a car battery and my alarm hooked up on the work bench,

Red,blue,greed - go to 12V ref, lock/unlock from alarm module

Blue/Green - Go to lock/unlock to the actuator

BROWN / white - go to chassis ground

purple - go to 12v

Thanks for your help, it seems you found more information than I did with more than three hours of searching.