rs1000 test mode

Home / the12volt's Install Bay / Car Security and Convenience / rs1000 test mode (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

asjeep

Member - Posts: 22

Joined: July 03, 2003

Location: United States

Posted: June 11, 2008 at 12:42 PM / IP Logged

Hello,

Installed an rs-1000 system and following the instruction manual it states to enter test mode "turn the key off and on 3 times and leave in the off position, then press the valet button 11 times, holding it down on the 11th until you hear 5 beeps"

When i do this i gut nothing but a driver page, it never goes into test mode to ease the install of the shock sensor (or the microwave I will be adding shortly)

Anyone gotten theirs into test mode?

2001 jeep wrangler se

Back to Top

bdl666

Silver - Posts: 330

Joined: December 31, 2002

Location: United States

Posted: June 12, 2008 at 10:47 PM / IP Logged

After you do press the valet switch 11 times and hold, you have to press the unlock and start buttons at the same time twice to get to zones 1 and 4 test mode.

ieSpell rocks.

Back to Top

mach1 03

Member - Posts: 11

Joined: June 14, 2008

Posted: June 14, 2008 at 9:57 PM / IP Logged

i am looking at getting the rs-100 what do you guy think of it and were can i get the dual radar sensor (rs-325) and the AC-78 Power Window Roll up & Down Module. also i have a 03 mustang mach 1 do i need the AP DATA LINK and i have heard that if you get it you don't have to do the indivedual conections for any oem fuctions is this true?

thanks.

Back to Top

asjeep

Member - Posts: 22

Joined: July 03, 2003

Location: United States

Posted: July 23, 2008 at 3:50 PM / IP Logged

I never did make it into test mode just did it the old fashioned way....

but now i find myself wanting to enable features and can't get into programming....

My best guess is that As this is going into a manual car I did not connect all the wires so remote start would not work (it's too dangerous)

so I am guessing one of those wires i did not use tells the alarm that i have turned the key on and off 3 times..... any idea which one it might be?

2001 jeep wrangler se

Back to Top

asjeep

Member - Posts: 22

Joined: July 03, 2003

Location: United States

Posted: July 23, 2008 at 6:26 PM / IP Logged

never mind found my problem had the wrong keyed ignition source

2001 jeep wrangler se

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

rs1000 test mode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.