2004 hyundai santa fe amp power wire

Home / the12volt's Install Bay / Car Audio / 2004 hyundai santa fe amp power wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ravell

Member - Posts: 1

Joined: June 19, 2008

Posted: June 19, 2008 at 6:55 PM / IP Logged

2004 Hyundai SantaFe Amp Power Wire

Where in the fire wall do I drill or route it through???

Any Ideas will be greatly appreciated...

Thx Rav

I was looking at the spot where the clutch pedal would go but it seem the brake master cylinder is right behind it or is it not behind that location

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: June 21, 2008 at 7:52 PM / IP Logged

There isn't always a need for a hole.

Look for a factory harness going thru the firewall, the one's with the big arse rubber boot's.

Feed it thru there! Otherwise drill a "test" pin hole first. That should be the spot!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 hyundai santa fe amp power wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.