the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 bmw 745 li remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
frank_30 
Member - Posts: 26
Member spacespace
Joined: December 11, 2006
Location: Arizona, United States
Posted: June 23, 2008 at 1:48 PM / IP Logged  
need wiring for 2004 BMW 745 li  for remote start ?? help
"throw it in the gutter and go buy another"
kola7126 
Copper - Posts: 93
Copper spacespace
Joined: September 13, 2007
Location: Russian Federation
Posted: July 01, 2008 at 10:55 AM / IP Logged  

POWER SUPPLY +30: connect directly to the big wire coming out of the battery terminal. It is suggested such connection

as some connections with fixed supply are deactivated by the electronic system of the vehicle after about

30 min. from the extinction of the switchboard.

-31: connect with a cable terminal directly to the ground terminal located behind the driver’s side sill

cover.

IGNITION WIRE +15/54: connect to the BLACK/ RED wire, at the position nr. 19 coming out of the 32 way black connector

of the “battery cut out” central, in the passenger’s side boot. As alternative connect to the 1,5mm2

GREEN/ BLUE wire located in the wiring harness behind the driver’s side sill cover.

DIRECTION INDICATORS Connect to the wires: BLUE/GREEN pos. nr.4 for the driver’s side ant. direction indicator,

BLUE/BROWN pos. nr.1 for the passenger’s side rear direct. indic., BLUE/BROWN pos. nr.24 for the

passenger’s side ant. direct. indic., BLUE/GREEN pos. nr.55 for the driver’s side rear dir. indic., located

in the 88 way black connector coming out of the lights operating central located on the left of the steering

column. It is suggested to separate the lines by means of 4 diodes.

ELECTRIC WINDOWS Positive control signal

Doors and windows Comfort locking

Connect to the BLUE/RED wire at the position nr.7 (lock) and to the WHITE/ BLACK wire at the position

nr.9 (unlock), located in a 18 way black connector, directly on the coming out of the push-button panel

inside the driver’s side door.

CENTRAL DOORS LOCKING Negative control signal

Connect with both the (VIOLET and ORANGE) wires of the antitheft to the YELLOW/RED wire at the

position nr.24, of the 26 way white connector, directly coming out of the central locking unit located

behind the passenger’s side glove compartment

IMMOBILISATION POINT 1 Gasoil pump

Cut the BLUE/BLACK wire, in the 13 way black connector, of the white central located behind the

passenger’s side glove compartment.

IMMOBILISATION POINT 2 General ignition wire

Cut the BLACK / YELLOW wire in the connector coming out of the ignition key.

STARTER +50: Cut the 2mm2 BLACK wire located in the wiring harness coming out of the MOTRONIC central

placed in the lower part of the antipollen filter, in the engine compartment.

BONNET SWITCH Connect to the wire coming out of the lamp directly in the bonnet/engine.

DOORS SWITCH NOTE: the polarity is positive. Invert the signal with an additional relay. Connect to the RED / BLUE wire

located in the wiring harness coming out of the lamp of the driver’s side rudder pedals. As alternative: at

the position nr.20, in a black connector of the white central located behind the passenger’s side glove

compartment.

BOOT SWITCH Connect to the YELLOW/BLACK wire, at the position nr.19, of the 26 way white connector, directly

coming out of the white central placed behind the passenger’s side glove compartment.

X

frank_30 
Member - Posts: 26
Member spacespace
Joined: December 11, 2006
Location: Arizona, United States
Posted: July 01, 2008 at 11:04 AM / IP Logged  
kola7126 wrote:

POWER SUPPLY +30: connect directly to the big wire coming out of the battery terminal. It is suggested such connection

as some connections with fixed supply are deactivated by the electronic system of the vehicle after about

30 min. from the extinction of the switchboard.

-31: connect with a cable terminal directly to the ground terminal located behind the driver’s side sill

cover.

IGNITION WIRE +15/54: connect to the BLACK/ RED wire, at the position nr. 19 coming out of the 32 way black connector

of the “battery cut out” central, in the passenger’s side boot. As alternative connect to the 1,5mm2

GREEN/ BLUE wire located in the wiring harness behind the driver’s side sill cover.

DIRECTION INDICATORS Connect to the wires: BLUE/GREEN pos. nr.4 for the driver’s side ant. direction indicator,

BLUE/BROWN pos. nr.1 for the passenger’s side rear direct. indic., BLUE/BROWN pos. nr.24 for the

passenger’s side ant. direct. indic., BLUE/GREEN pos. nr.55 for the driver’s side rear dir. indic., located

in the 88 way black connector coming out of the lights operating central located on the left of the steering

column. It is suggested to separate the lines by means of 4 diodes.

ELECTRIC WINDOWS Positive control signal

Doors and windows Comfort locking

Connect to the BLUE/RED wire at the position nr.7 (lock) and to the WHITE/ BLACK wire at the position

nr.9 (unlock), located in a 18 way black connector, directly on the coming out of the push-button panel

inside the driver’s side door.

CENTRAL DOORS LOCKING Negative control signal

Connect with both the (VIOLET and ORANGE) wires of the antitheft to the YELLOW/RED wire at the

position nr.24, of the 26 way white connector, directly coming out of the central locking unit located

behind the passenger’s side glove compartment

IMMOBILISATION POINT 1 Gasoil pump

Cut the BLUE/BLACK wire, in the 13 way black connector, of the white central located behind the

passenger’s side glove compartment.

IMMOBILISATION POINT 2 General ignition wire

Cut the BLACK / YELLOW wire in the connector coming out of the ignition key.

STARTER +50: Cut the 2mm2 BLACK wire located in the wiring harness coming out of the MOTRONIC central

placed in the lower part of the antipollen filter, in the engine compartment.

BONNET SWITCH Connect to the wire coming out of the lamp directly in the bonnet/engine.

DOORS SWITCH NOTE: the polarity is positive. Invert the signal with an additional relay. Connect to the RED / BLUE wire

located in the wiring harness coming out of the lamp of the driver’s side rudder pedals. As alternative: at

the position nr.20, in a black connector of the white central located behind the passenger’s side glove

compartment.

BOOT SWITCH Connect to the YELLOW/BLACK wire, at the position nr.19, of the 26 way white connector, directly

coming out of the white central placed behind the passenger’s side glove compartment.

X

Thank you ,had no help on this vehicle seem like no one likes to touch these! :) Thanks Again.

"throw it in the gutter and go buy another"

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer