fiberglass molding project

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / fiberglass molding project (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ceasar326

Copper - Posts: 239

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 02, 2006

Location: Minnesota, United States

Posted: July 09, 2008 at 6:53 PM / IP Logged

I'm working on a 2006 Chevy silverado. It has the on-star so I'm just adding some subs. There not much space for a box, so ima build a box out of fiberglass in back of the passenger seats. I'm molding the liner and was woundering how many layers fiberglass should I add before removing it from the molding. I'll post pic as I go along.

Back to Top

jar754

Copper - Posts: 142

Joined: December 16, 2003

Location: Illinois, United States

Posted: July 09, 2008 at 8:57 PM / IP Logged

2-3 should be good enough remember to use a wax release

Back to Top

ceasar326

Copper - Posts: 239

Joined: February 02, 2006

Location: Minnesota, United States

Posted: July 09, 2008 at 9:22 PM / IP Logged

Thanks for the info. I did use wax and the firs coat of fiberglass was heavy, so that's why I dint know how many coats to add. I'm letting it dry for a day so hopefully its dry to add another one.

Back to Top

jar754

Copper - Posts: 142

Joined: December 16, 2003

Location: Illinois, United States

Posted: July 10, 2008 at 12:06 AM / IP Logged

if you want a good site for glassing info check out fiberglassforums.com lots of pics on projects from box,kicks,beauty panels. basicaly anything fiberglass

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fiberglass molding project

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.