multiple amp wiring

Yes and no they have distro blocks where the power and ground are on the same unit but they are fused just in case the wires touch but at this point that's too many fuses. I would recommend to get a 2 distro blocks one for power and ground. Make sure your cap is wired before your amp and you charge it first. So according to your setup you would need a 2 input 0 guage and 4 output distro block. The inputs are for your power wire/cap power wire and the outputs are for the amp which would be 4 gauge unless your whole system is 0 guage. Same order for your ground. Good luck post any more questions you may have1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"